With the same energy consumption, the production capacity is increased by 5-10%, and the finished product rate increased by 10% with the same discharge port size
The friction coefficient is small, the full roller bearing transmission, the heat generation is low, and the service life extended by 3~4 times
The needle-like content is 3-5% lower, and the loss of rear-end shaping materials is reduced by 3-5%
It is suitable for extremely high temperature areas, with high internal heat resistance and oil temperature 20℃ higher
One-click adjustment of the discharge port, one-click calibration of the wear value, and one-click clearing of the cavity blockage
The operation and maintenance cost drops by 30%+
| Model | Chamber | Feed port size(mm) | Maximum feed size(mm) | Discharge port adjustment range(mm) | Output Capacity(t/h) | Motor power(kW) | Machine weight(t) | Dimensions L×W×H(mm) |
| HC1000 | Coarse | / | 195 | 22-36 | 140-220 | 160 | 12 | 2100×1950×1580 |
| Medium | / | 160 | 19-36 | 125-210 | 160 | |||
| Sand | / | 63 | 13-32 | 85-165 | 160 | |||
| HC1100 | Coarse | / | 220 | 25-45 | 230-440 | 250 | 17.5 | 2400×2175×1800 |
| Medium | / | 190 | 18-45 | 200-400 | 250 | |||
| Fine | / | 110 | 12-45 | 150-350 | 250 | |||
| HC1100X | Coarse | / | 220 | 25-45 | 230-440 | 250 | 19.5 | 2650×2320×1856 |
| Medium | / | 190 | 18-45 | 200-400 | 250 | |||
| Fine | / | 110 | 12-45 | 150-350 | 250 | |||
| HC1300 | Standard | / | 220 | 20-40 | 220-320 | 250 | 24 | 2530×2380×2090 |
| Sand | / | 63 | 13-22 | 165-240 | 250 | |||
| HC1300PRO | Medium | / | 220 | 26-45 | 220-450 | 315 | 23 | 2580×2320×2090 |
| Fine | / | 110 | 18-45 | 180-250 | 315 | |||
| HC1300X | Medium | / | 220 | 26-45 | 220-450 | 315 | 25.2 | 2850×2350×2200 |
| Fine | / | 110 | 18-45 | 180-250 | 315 | |||
| HC1500X | Coarse | 320 | 280 | 30-50 | 405-745 | 355 | 43 | 3550×2600×2910 |
| Medium | 260 | 210 | 25-50 | 365-715 | 355 | |||
| Fine | 150 | 140 | 15-30 | 255-500 | 355 |
400-887-7788
Email：[email protected]
+8659522905555
© 2025 NFLG Inc. All rights reserved.
Get a free quote
400-887-7788
Find a Dealer
Service support